📄️ Lumen
Lumen, a cutting-edge carrier board, specifically designed to complement and enhance the capabilities of NVIDIA Jetson modules.
📄️ Radian
Radian, a Premier flight control system designed for seamless flight performance and full Pixhawk ecosystem compatibility.
📄️ Nexus
Nexus, 4-Port USB 3.2 Gen 1 SuperSpeed USB Hub board, provides fast and reliable connection to USB peripherals.
📄️ Flux
Flux, High-performance 5-port 10/100/1000M Ethernet switch featuring a low-power integrated 5-Port Giga-PHY that supports 1000Base-T, 100Base-TX, and 10Base-T.
📄️ Pascal
Pascal, a cutting-edge carrier board, specifically designed to complement and enhance the capabilities of Raspberry pi compute modules.
📄️ Kelvin
The Kelvin is a high-performance Raspberry Pi CM5 carrier board engineered for robotics, drones, and embedded systems that demand compactness, speed, and robust connectivity.
📄️ Polar
The Aerium Polar is a high-precision GPS module designed for drones, UAVs, and robotics applications requiring fast, accurate positioning in a compact, lightweight form. It features the u-blox MAX-M10S GNSS receiver and Bosch BMM150 magnetometer for heading, offering support for multiple GNSS constellations, low power consumption, and robust performance in embedded systems.
📄️ Zenith
The Aerium Zenith is a high-performance GPS module tailored for drones, UAVs, and robotics platforms that demand compact size, ultra-low power consumption, and enhanced urban GNSS performance. It features the u-blox MAX-F10S GNSS receiver and Bosch BMM150 magnetometer, providing robust positioning with improved signal acquisition in dense environments.
📄️ Datum
The Aerium Datum is a high-precision, multi-band GNSS receiver optimized for UAVs, drones, and robotic applications requiring fast, reliable, and accurate location data. Powered by the advanced u-blox NEO-M9N chipset, it supports concurrent reception of four GNSS constellations and integrates a built-in active ceramic antenna with onboard protection and filtering for enhanced reliability in harsh environments.
📄️ Atlas
The Aerium Atlas is a high-precision, multi-band RTK GNSS receiver designed for UAVs, drones, and robotics applications requiring centimeter-level accuracy and robust multi-constellation support. It features the u-blox NEO-F9P chipset and a built-in active ceramic antenna, offering professional-grade positioning performance in a compact, UAV-optimized form factor.
📄️ Altius
The Aerium Altius is a professional-grade flight controller based on the Pixhawk Cube Orange architecture. Designed for demanding UAV applications, the Altius integrates redundant sensors, high-speed data buses, and real-time processing optimized for autonomous flight, precision navigation, and mission-critical reliability.
📄️ Alpha
The Alpha is a compact, high-efficiency AM32-based electronic speed controller (ESC) engineered for 2S–4S LiPo systems—perfect for mini drones, micro UAVs, and small robotic platforms. Featuring a 32‑bit ARM processor and DRV8300 smart gate driver, it delivers precise, responsive motor control in a rugged, lightweight package.
📄️ Theta
The Theta is a high-performance brushless electronic speed controller (ESC) designed for drones, UAVs, and robotics platforms powered by 4S–8S Battery systems. Featuring a 32‑bit ARM microcontroller and TI DRV8300 smart gate driver, Theta delivers smooth sine-wave startup, responsive throttle control, and robust protection, running open‑source AM32 firmware.
📄️ Connexa
The Connexa is a compact, high-reliability M.2 Key A/E USB 2.0 hub module. Designed for embedded systems, UAVs, and robotics, it expands a single USB interface into multiple high-speed ports using a robust and space-efficient layout.
📄️ Meridian
The Aerium Meridian is a compact, high-performance GNSS receiver module in M.2 Key E format. Featuring the u‑blox NEO‑M9N chipset and an onboard Bosch BMM150 magnetometer, it delivers multi‑constellation GNSS positioning with integrated heading sensing for UAVs, robotics, and embedded systems.
📄️ Vector
The Aerium Vector is a compact, M.2‑Key E integrated flight controller featuring redundant sensor arrays, GNSS, and airspeed sensing, built for Pixhawk-compatible UAVs and robotics platforms.
📄️ Helios
Helios, a cutting-edge carrier board, specifically designed to complement and enhance the capabilities of NVIDIA Jetson modules.
📄️ Stellar
The Aerium Stellar is a dual-band GNSS, including L5, to deliver improved positioning precision, faster satellite acquisition, and enhanced performance in challenging environments. Combined with the Bosch BMM150 magnetometer, it provides reliable heading and orientation data. Fully compatible with Pixhawk flight controllers, Aerium Stellar is designed for recreational, commercial, and industrial UAV applications where top-tier performance and dependability are paramount.
📄️ Portus
The Portus is an M.2 Key A/E expansion card that extends connectivity. It features a LAN7430 controller for a Gigabit Ethernet port and a USB2514IB hub that provides two standard USB ports. The remaining two USB lines are routed through FT234 bridges, delivering dual UART ports.
📄️ Orion
The Aerium Orion is a dual-band GNSS module, powered by the u-blox NEO-F10N, delivering L1/L5 precision, faster satellite acquisition, and robust performance in even the most challenging environments. Paired with the Isentek IST8310 magnetometer, it provides accurate heading and orientation data to complement its positioning capabilities. Fully compatible with Pixhawk flight controllers, Aerium Orion is engineered for UAV, robotics, and embedded applications where compact design, top-tier performance, and absolute reliability are essential.
📄️ Polaris
The Aerium Polaris is a miniature GNSS module, powered by the u-blox MAX-M10S, delivering exceptional positioning performance with low power consumption in a highly compact form factor. Designed for applications where space and efficiency matter, Polaris ensures reliable satellite acquisition and tracking, even in challenging environments. Fully compatible with Pixhawk flight controllers, Aerium Polaris is tailored for UAV, robotics, and embedded applications where every gram and millimeter count.